How to connect a wireless router to a hotspot

How To Connect A Wireless Router To A Hotspot?

Wireless hotspots are known in the tech world as access points that provide users with a temporary internet connection. Though typically found in public places, like malls, cafes, and schools, the growing demand for 24/7 Wi-Fi has pushed this technology to evolve.

At present, specialized handheld contraptions, which work as a hotspot, have been introduced to the public. Even mobile phones and tablets have been equipped with this feature. This arms users with increased convenience and the flexibility to go online whenever they please. In this age of digitalization, this is truly a marvelous feat.

The downside to this setup, however, is the limited bandwidth that it can give, as well as the controlled number of connected gadgets. Thankfully, syncing the hotspot to a router can easily solve this conundrum. To further describe how this works, I’ll be presenting you with a simplified guide of how to connect a wireless router to a hotspot.

Step 1 – Purchase A Wireless Ethernet Bridge

A wireless Ethernet bridge is a tool that links two network devices via radio frequency. It is most commonly used to share Internet access from a primary source towards an external outlet. This comes with two or more cables – each with its own LAN jack.

wireless ethernet bridge

EnGenius wireless ethernet bridge

The first step to effectively connecting your wireless router to a hotspot will be to buy an Ethernet bridge. Go down to your local computer store and you should have no problem finding one. For first time buyers, you should go for a reputable brand instead of a generic one, which would probably cost you $50 to $80. It may be a bit pricey but, at least, you won’t worry about the quality or the compatibility.

Once you’ve made the purchase, take it home and carefully read the manual. You should also plug it in to make sure that its working fine. After confirming that it is running smoothly, you can proceed to the next step.

Step 2 – Sync The Bridge

The second step on how to connect a wireless router to a hotspot requires you to focus on the Ethernet bridge. Again, insert its power adaptor into a socket and turn the apparatus on. Wait for a few minutes and the wireless connection should be available.

Afterwards, turn on the Wi-Fi ability of your phone or tablet and link it to the bridge. Configure the settings using either a web page or a software installer. Regardless of format, it should only require to fill in a username and password, which you should find on the box or in the user’s manual. Enter all the data and you should be good to go.

Step 3 – Connect It To A Wireless Router

The third step is very simple. All you’ll need to do is connect the Ethernet bridge, using a dedicated cable, to the wireless router. As a result, it will help widen the network range by extending the signal. Furthermore, more appliances are able to gain access to the system.

Step 4 – Activate Bridge Mode

Once the two devices have been physically interconnected with one another, it is now time to trigger the bridge mode. Activating this option will allow the Ethernet bridge to serve as the main conductor of signals, from the hotspot going to the router.

You can achieve this by, again, powering up your router and wirelessly connecting it to your personal gadget. You should see a confirmation message on your connectivity settings, which states that you’ve done this. Then, search for the DHCP tab and tick the prescribe option. It’s as easy as that.

To check if you’re done it correctly, open any web browser or application. If the page loads seamlessly, then congratulations, you’re already online! However, if you don’t seem to have any Internet access, there’s probably something wrong with one or more connections. Re-do the previous 4 steps to see where you went wrong.

Step 5 – Change The Default Network Name And Password

Now that all the instruments have been properly taken care of and configured, and you’re enjoying speedy Wi-Fi, it’s now time to secure the system. The most basic way to do this is by personalizing the network name and passcode.

First, you’ll need to think something unique for these two details. Try to make it as wild and wacky as possible so it can easily be distinguished.

As for the access code, choose one that’s complicated and personal, but also easy to remember. Avoid using generic information like your birthday or the name of your dog. These can be easily searched for and are usually the first things a hacker will try. Additionally, use multiple combinations of upper case and lower case letters, numbers, and even symbols. This strengthens your password and makes it more difficult to guess.

As soon as you’re contented, log-in to the router’s configuration portal – its either web-based or software-based – and make the change. Most platforms will ask you for the original information. Search for this on the router itself. Once you’ve done this, type it in, together with your chosen network name and password, and click enter.

To verify if the changes have been made, disconnect from the server and reconnect. It should ask you for a new password. This should be a sign that all modifications have been accepted.

Step 6 – Finalizing The Setup

Finally, you can now open the network to your friends and family. Give them the necessary information to log in and examine the Internet speed. As long as pages are loading swiftly and there are minimal lags, you should be fine.

Remember also to keep your access code in mind at all times. Its best to write it down on a piece of paper, but be sure to keep it safe. Of course, I shouldn’t need to remind you to only share it with close friends and family. The last thing you want to do is jeopardize the integrity and security of this network.

Right now, enjoy surfing the web! After a long and rigorous task, you truly deserve it!

Conclusion:

Going through this process may be challenging, but it is also necessary. Having this trick up your sleeve will help you maximize the uses of your hotspot. Not only are you extending its signal range, but more users will be able to enjoy the Internet. You can use this craft set  up for homes and small business because setting this up is significantly cheaper than DSL or cable Internet.

Regardless of your reasons, be proud for conquering this encounter. As I’ve always said, learning how to connect a wireless router to a hotspot should be something every computer user knows how to do.

For added tips, you can also check this video out: 

About the Author Steven

Here at OnRampWireless, we want users to have a deeper understanding of the internet. Our goal is to encourage people not just to use it but know how it works as well. This begins with knowing the simplest of details first.

follow me on:

Leave a Comment: