One can safely say that the internet has been a big part of our daily lives. It’s one of the discoveries that we are so grateful for. However, behind our internet connection or Wi-Fi is a set of devices being used basically all of the time.
I’m talking about modems and wireless routers being used all the time for different devices to connect to a local network. A lot might ask, “why do I have to keep resetting my wireless router?” Since routers basically work 24/7, they also need a break.
Imagine having to run around an open field countless of times without breaks. It would be a miracle not to feel any exhaustion. Because of the non-stop use of our wireless routers, they often crash or work incorrectly. In order for them to take a short break, routers need rebooting or resetting every once in a while.
So, “why do I have to keep resetting my wireless router?” you may ask. Simply put it this way. One of the reasons why you need to constantly reset your router is because it works like a computer. Just like your PC, it has CPU, memory, local storage, and an operating system, and it also has its downtimes.
There are different reasons why your router can go wrong from time to time. And, what’s the fastest and easiest fix for this problem? Surprise, surprise—restarting your router every once in a while.
However, know that restarting your router only lets it function properly again. It does not really troubleshoot any internal or systematic problems but it solves problems short-term. And sometimes, it’s the only fix you need.
In order to answer “why do I have to keep resetting my wireless router?”, you need to have a deeper understanding of why routers crash. Just like any hardware, routers crash for different reasons. Below are the most common ones:
Like any other devices, especially if used for long hours, your router will overheat. This causes routers to crash more often.
The chances of your router overheating are higher if you keep it in an enclosed space. If you take a good look at your router, you’ll likely be seeing vents; make sure these vents aren’t concealed or covered. Also, if you see dust resting on the surface of your router, do clean it immediately.
To make the story short, it is best for routers to be out in the open to avoid overheating. Plus, the chances of getting a better signal is increased when your routers aren’t kept in enclosed areas.
Since your router works like a computer, firmware bugs often cost too much memory. These bugs sometimes slow down your router, or worse, cause your router to stop working.
If this happens often, and a good restart doesn’t solve this, you might need to update your firmware first. Updating your router’s firmware is really as easy as updating any software installed on your computer. Basically, you just have to type in your IP address on your web browser, and click on the “Update” button.
Routers carry both private and public IP addresses. However, it couldn’t always deliver a perfect job, so it malfunctions sometimes. Therefore, causing inconvenience to all the devices connected to it.
There are different reasons why your connection might be interrupted due to IP address reasons, like having two devices with the same IP address, or an outdated public IP address. When any of these happen, you might want to reset your router so it could work better again.
So, you might have heard of this. The moment we notice our routers not functioning properly, our go-to solution would be shutting it off, wait for 10 seconds, and turning it on again. However, do we really need to wait for 10 seconds? Why not only five?
I think the questions “why do I have to keep resetting my wireless router?” and “why do I have to wait for 10 seconds?” go hand in hand. What is with 10 seconds that greatly help the performance of the routers, anyway?
Most of the gadgets and electronics we use today have capacitors that are in the form of small batteries. Because of its small size, it does not hold much energy. So, what it possesses might be just sufficient to keep a memory chip running for a short time. In addition, waiting for 10 seconds allows a capacitor to be fully drained, making every single memory cleared.
Giving your router 10 more seconds after resetting gives it time to actually reset, which might resolve anything that occurred before it malfunctioned. Much like how we, humans, need that extra 5 minutes in bed after our alarm rings to be fully awake.
Although the 10-second rule greatly helps the performance of your router, some instances don’t require you to wait for a certain amount of time. Some cases would only need an automatic restart, which won’t be needing the additional 10 seconds, for your router’s system to be functioning properly again.
In conclusion, restarting your router on a regular basis fixes some common problems encountered on routers. You can restart your router on a schedule. That way, it can be done automatically without having to do it manually.
You can do this in two ways—have an outlet timer or run a script on your router. The latter seems like a job only the computer wizards can do; so, take your pick.
Using an outlet timer works like a regular timer. The difference is that it cuts the power at a certain time you prefer, and let the power flow back again at a specific time chosen. Rebooting your router on a schedule using an outlet timer is probably an easy way to do the job.
Now, for the “geeky way.” You can get a script to run on your router which also allows it to restart your router. To do this, you can research the web for steps to restart a router using a script. It’s probably easy if you understand codes without getting confused.
You can’t have a stable internet connection or home network without a well-conditioned wireless router, that’s why knowing why you have to reset it every now and then is important. As a responsible owner, understanding how your wireless router works is a necessity. This allows you to handle it better and be wary of its status, which will benefit you in the long run.
We’re hopeful that you will find this guide on “why do I have to keep resetting my wireless router” useful.
Here at OnRampWireless, we want users to have a deeper understanding of the internet. Our goal is to encourage people not just to use it but know how it works as well. This begins with knowing the simplest of details first.